Long-term wear will undoubtedly lead wristwatches to get dusty and scratched, which makes them look old and unpleasant. Consequently, you should routinely and carefully clean the watch. To maintain cleanliness, however, cleaning watches at home is just as effective as taking them to the store. Julius Malaysia will explain to you how to quickly and easily clean your watch at home in this article.
Table of contents for the article
How to clean watch straps
You should have specialist tools on hand while cleaning the watch band at home to ensure efficiency and speed up the process:
- Lint-free, plush fabric
- Cotton swab, soft bristle brush,
- Small glasses and bowls
- Warm water, mild soap, and detergent.
Cleaning for watches with leather straps
When leather straps aren’t cleaned for a while, they frequently develop an unpleasant odour; as a result, you need to do the following procedures to eliminate the odour and clean the watch band:
- Step 1: To make cleaning the watch easier, start by removing the band.
- Step 2: Wipe the wire section with a delicate cloth that can absorb water.
- Step 3: Lightly spray some detergent on the watch band, scrub the spots with a soft brush, then dab a cloth in water to absorb it and rinse. Your watch band has been cleaned; use a dry towel to wipe it once more.
Watch with a cloth strap
Regular cleaning is essential because fabric watch bands are prone to gathering dust and perspiration. The following are the precise procedures to clean the watch with the fabric band:
- Step 1: Take the watch’s strap off.
- Step 2: Soak for approximately 10 minutes in a solution of mild detergent and water.
- Step 3: To remove the soiled layer once the rope has been wet, use a soft towel. You shouldn’t use a brush on watches with fabric straps since it can ruffle the coat.
- Step 4: After cleaning, you can dab away any excess moisture with a dry cloth and let the watch band air dry in a cool location.
Watch with metal strap
Metal watch straps have a great propensity to draw dust into their crevices, and as a result, the wire will become highly unattractive and tarnished with time. Avoid immersing the watch in water when cleaning the metal band. Following are the steps:
- Step 1: Combine soap with 50-degree warm water.
- Step 2: Drop the watch band into the combined solution and let it sit for a few minutes before using a soft bristle brush to spread it out.
- Step 3: Rinse under running water and towel dry.
Rubber strap watch with silicone
When dust is present, watches with rubber or silicone bands are simple to clean and the cleaning procedure is also easier:
- Step 1: Dip the watch band into a solution of soap and water, then gently pat it dry with a towel.
- Step 2: To remove dust from every corner of the slot, if there is any in there, use a toothpick.
- Step 3: Clean them off with water, then pat them dry with a towel.
You will need different cleaning techniques for various watch band types, so keep in mind the tips we’ve provided above to protect your timepiece.
Cleaning a watch face
You can use the instructions for cleaning the watch face below after cleaning the watch strap. You must exercise much greater caution while handling the watch face to prevent damage from water flowing within. The following are the cleaning steps:
- Step 1: Combine a little water and soap, avoid using harsh detergents that could harm the watch’s face.
- Step 2: To clean the watch face of stains, wipe it with a soft cloth dipped in soapy water. Since the watch face has knobs, care must be taken to avoid allowing water to soak into the watch.
- Step 3: Clean the strap region. If there are any hard-to-reach areas, use a cotton swab to speed up the cleaning process.
- Step 4: Wipe everything down with a clean towel, reattach the strap and watch face, and you’re ready to resume regular use.
Effective ways to maintain watches
You should properly take care of and routinely clean your watch if you want it to last longer and look better.
- Avoid exposing the watch to hard objects as they could scratch or harm it.
- Limit the watch in hot areas, keep the watch in areas where magnetic fields are stored, such as on refrigerators, televisions, magnets,… or limit the watch in areas where chemicals and solvents have an impact on the copper’s lifespan, such as lakes.
- You can keep the watch in the box if you decide to stop using it.
Observations for cleaning the watch
To avoid degrading the watch’s quality, you must pay attention to the few minor details listed below when cleaning the watch.
Frequently maintain and clean the watch
Regular cleaning will keep your watch looking new, more aesthetically pleasing, and cleaner. Additionally, you should regularly maintain the watch, roughly every five years. particularly the watch you wear frequently.
You must first remove the strap before cleaning
When cleaning your watch, keep in mind that the strap should be taken off first. Since the strap must be cleaned differently than the watch face, removing the watch will make cleaning easier and more convenient. As a result, the watch still maintains its quality when worn.
Pick your cleaning agent wisely
You should select a mild, organic cleaning solution to reduce the likelihood of the watch band fading depending on the type of watch band. You can use any of the several specialist cleaning products available nowadays for wristwatches.
Watches available from Julius
Currently, Julius has locations throughout most of the provinces in the nation. Customers can simply purchase watches at the store themselves, however purchasing watches online is also an intriguing option.
We also offer incredibly alluring product warranties, regardless of how you decide to purchase Julius watches. If the product has an internal flaw, you can return it and get a free replacement watch strap the first time and a free replacement battery for the rest of your life.
If you have any questions while using the product, call the hotline at 0132458917. Hopefully, the information provided above will give you a technique to effectively and correctly clean the watch.