How to properly maintain and clean watches

It doesn’t matter if the watch is for men or women, waterproof, scratch-resistant, or not. Regular use will cause it to swiftly lose its shine. You should pay attention to routinely cleaning your watch if you want to carry a product that is both nice and long-lasting. This will aid in reducing any threats to your watch. For more useful advice on how to take better care of your watch, please see Julius’ article below!

1/ Does the watch need to be cleaned frequently?

The watch is prone to dust, sweat, and grime when used often in daily life, and if it is not cleaned for an extended period of time, it will become damaged and lose its natural sheen. significantly shorten product life and cause damage.

The watch must therefore be cleaned frequently, appropriately, and according to established protocols to maintain it looking brand new and reduce the chance of internal movement damage. cause serious harm.

But how frequently should the watch be cleaned is the real concern. The manufacturer advises that the optimal interval for application, if used daily, is once a week, or, if you use less, once a month. The stains will be challenging to remove if you wait too long to clean it, which will cause scratches and quick wear and tear on the watch.

2/ How to clean the watch

In addition to needing to be maintained at watch stores every five years, regular cleaning of watches will make them look newer and more attractive. In particular, if you wear the watch frequently, you should clean it regularly – typically once per month.

2.1/ The gear needed to get ready to clean a watch

The following tools must be ready before you start cleaning the watch band:

• The fabric is soft, thin, and lint-free.
• Warm water, mild soap, and detergent.
• A little basin or container
• Cotton swab, soft bristle brush,…

2.2/ Cleaning procedures for various watch types

2.2.1/ Strap cleaning

With a leather watch strap

In order to eliminate the scent and keep the leather strap from losing its luster, watch straps should be cleaned properly. The following are the steps:

Step 1: In order to clean the watch, you must first remove the strap.

Step 2: Dampen a soft cloth with some water, then wipe it over the wire.

Step 3: To finish, add a little cleaning solution and scrape the surface lightly to remove sweat and debris. Lastly, clean it with a dry cloth!

Watch with a cloth strap

When using a cloth strap watch, it is also quite simple to attract sweat and dirt. However, cleaning this kind of wire is not too difficult, therefore you may do so on a regular basis by taking the following actions:

Step 1: To avoid getting water on the watch face during cleaning, remove the strap from the timepiece. The watch band is then submerged in specialist detergent or soap that has been diluted with water for around 10 minutes.

Step 2: After the watch band has been submerged in water, gently wipe out any dust with a soft cloth.

Note: Due to the wire’s propensity to ruffle, it is strongly advised against using a brush to clean.

Step 3: After cleaning the watch, dry the band with a towel in a cool area before putting it back on.

Watch with a metal strap

If your watch has a metal band, you can choose whether to take it off before cleaning. Even if the watch is water-resistant, you must avoid getting water on the watch’s face during cleaning to prevent harm. The following are the steps:

Step 1: Boil some water to about 50 degrees Celsius and add a little soap (do not use water at high temperatures).

Step 2: Add the watch bands to the prepared solution, and let them soak for a little while. The wire should then be thoroughly cleaned inside and out using a soft-bristled brush.

Step 3: After that, wash it in water and either dry it with a towel or let it air dry.

2.2.2/ Keep your face clean

You must then clean the watch face after cleaning the watch band. When cleaning the watch face, you must be cautious to prevent harm from water spilling into the watch face. The following are the cleaning steps:

Step 1: Combine some water with some soap; under no circumstances add harsh detergents as they will harm the watch.

Step 2: Wipe the area around the watch with a delicate cloth dampened with a small amount of water to get rid of any stains or fingerprints.

Remember to remove the watch band for easier cleaning and to close the watch’s knobs to prevent water from entering the watch while you’re cleaning it!

Step 3: Cleaning the space between the watch strap and the watch face. To clean this area, use a cotton swab.

Step 4: Reassemble the watch and watch band after thoroughly wiping the entire device off with a fresh towel.

3/ Keeping the watch safely stored

Your watch needs to be cleaned and maintained properly if you want it to survive longer. Here are some techniques for keeping them:

• Avoid letting the watch face come into contact or impact with hard objects to prevent damage and unsightliness.
• Avoid putting the watch near chemicals, solvents, alcohol, or high-temperature areas where magnetic fields are stored, such as refrigerators, televisions, or magnets. These conditions will also shorten the watch’s lifespan and degrade its quality.
• When your watches aren’t being worn, store them carefully in a closed cabinet or a box.

4/ Some suggestions for cleaning watches

To avoid having an impact on the watch’s quality, users should be aware of the following concerns when cleaning the watch:

Frequently maintain and clean the watch

In addition to needing to be maintained at watch stores every five years, regular cleaning of watches will make them look newer and more attractive. In particular, if you wear the watch frequently, you should clean it regularly—typically once per month.

You must first remove the strap before cleaning

Users are advised to remove the strap whether the watch is waterproof or not. On the one hand, it makes cleaning easier and cleaner, and on the other, it aids in maintaining the watch’s quality for prolonged usage.

As stated above, you can select specialist cleaners and tools based on the type of watch band to prevent circumstances that cause the band to fade.

You can currently choose from a wide variety of specialist cleaners kinds on the market. Dishwashing liquid is a good option for cleaning because it not only reduces the cost of the process but also ensures cleanliness while causing little to no harm to the watch band.